Circuit Breaker 3WL1216-3NG66-5AF4-Z A08+C01+C22+F02+F36+K12+M45+R10+R16+R21+R30+S24+S33+T40

Draw-out circuit breaker with slide-in module frame 3-pole, Size 2, IEC In=1600 A up to 690 V, 50/60 Hz AC Icu=85 kA at 500 V Rear horizontal connection Overcurrent release ETU 76 LSING protection adjustable 0.4-1 in with graphic display U cubicle bus with ground fault protection Opt.: Comm./measuring func./ZSI Motorized/manual operating mechanism with spring charging motor AC 50/60 Hz 110-127 V AC or 110-125 V DC Activation 50/60 Hz 110 V AC, 110 V DC without 1st auxiliary release With 2nd auxiliary release "F", F2 Shunt release 110 V AC/DC 100% on-load factor 4NO+4NC A08= Tin plating of customer terminals in slide-in unit frame for horizontal connection or flange connection C01= mechanical switching cycle counter C22= Ready indicator F02= COM15 PROFIBUS module with breaker status sensor F36= Metering PLUS Voltage-tap bottom side I, U, P,W, Q, f, cos phi, harmonics, THD, K12= Remote reset solenoid 120 V AC/125 V DC M45= Opening solenoid, overexcited 110-127 V AC/110-125 V DC 5% on-load factor, not for continuous operation R10= Arc chute cover withdrawable part not possible with option A05 Rated voltage 1000 V R16= Position signaling switch, withdrawable part 6 changeover contacts R21= Shutter 2-part can be locked with padlock R30= Locking device against opening of the control cabinet door S24= Emergency Off switch S33= Castell/Fortress Tension lever T40= Door sealing frame